LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2016 >> iM Standard Trans >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System - Service Information >> Mass Air Flow Meter >> Removal [06/2015 - ] >> Procedure

Removal [06/2015 - ]: Procedure

  1. REMOVE MASS AIR FLOW METER SUB-ASSEMBLY 
    1. Disconnect the mass air flow meter sub-assembly connector.
      GTY453200Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 screws and mass air flow meter sub-assembly from the air cleaner cap sub-assembly.
      NOTE:

      If the mass air flow meter sub-assembly has been struck or dropped, replace it.

scientia non olet · About LEMON Manuals