LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2016 >> iA Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System - Service Information >> Mass Air Flow Meter >> Removal [07/2015 - ] >> Procedure

Removal [07/2015 - ]: Procedure

  1. REMOVE MASS AIR FLOW METER 
    1. Disconnect the negative battery cable.

      Refer to REMOVAL [07/2015 - ]

    2. Disconnect the MAF sensor/IAT sensor No. 1 connector.
      GTY492132Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Screw *b Connector
      *c MAF Sensor/IAT Sensor No. 1 -  
    3. Remove the screws.
    4. Remove the MAF sensor/IAT sensor No. 1.
scientia non olet · About LEMON Manuals