Precaution [12/2013 - ]
- PRECAUTIONS WHEN REPLACING STEERING LOCK ACTUATOR ASSEMBLY (STEERING LOCK ECU)
- If the steering lock actuator assembly (steering lock ECU) is replaced, be sure to confirm that the steering is unlocked by turning the steering wheel to the left and right before starting the engine. If the steering is locked for any reason, open and close a door with the engine switch off, and then unlock the steering by pressing the engine switch. This prevents the engine from starting while the steering is locked.
- PRECAUTION FOR REGISTRATION
- If replacing any of the following parts, refer to Registration. Refer to REGISTRATION [12/2013 - ]
.NOTE:
- When the certification ECU (smart key ECU assembly) is replaced, it is necessary to have all registered electrical key transmitter sub-assemblies.
- Any keys or ECUs for which registration has been performed cannot be reused.
- ID code box (immobiliser code ECU)*
- Certification ECU (smart key ECU assembly)
- Steering lock actuator assembly (steering lock ECU)
- ECM
- Electrical key transmitter sub-assembly (key)
*: w/ ID Code Box
- If replacing any of the following parts, refer to Registration. Refer to REGISTRATION [12/2013 - ]
.