Input Shaft: Inspection: Inspection

INSPECT FRONT CLUTCH DISC
1. Check whether the sliding surface of the discs, plates and flanges are worn or burnt.
  
  Fig 1: Identifying Front Clutch Disc
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  If necessary, replace them.
  NOTE:
  - If the lining of any disc is peeling off or discolored, or even if a part of the printed number is defaced, replace all the discs.
  - Before assembling new discs, soak them in Toyota Genuine ATF WS or equivalent for at least 15 minutes.
INSPECT FORWARD CLUTCH RETURN SPRING SUB-ASSEMBLY
1. Using vernier calipers, measure the free length of the spring together with the spring seat.
  
  Fig 2: Measuring Free Length Of Spring With Spring Seat Using Vernier Calipers
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Standard free length
  
  21.69 mm (0.8540 in.)