Fuel Sender Gauge Assembly: Installation: Installation

INSTALL FUEL SENDER GAUGE ASSEMBLY

Fig 1: Installing Fuel Sender Gauge
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Install the fuel sender gauge by sliding it downward.
2. Connect the fuel sender gauge connector.
  
  Fig 2: Identifying Fuel Sender Gauge Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FUEL SUCTION TUBE ASSEMBLY WITH PUMP AND GAUGE See step 1
INSTALL FUEL PUMP GAUGE RETAINER See step 2
CONNECT FUEL TANK VENT HOSE See step 3
CONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY See step 4
INSTALL REAR FLOOR SERVICE HOLE COVER See step 5
INSTALL REAR SEAT ASSEMBLY . Refer to INSTALLATION - Step 1
INSTALL NO. 2 REAR SEAT LEG COVER . Refer to INSTALLATION - Step 2
INSTALL NO. 1 REAR SEAT LEG COVER . Refer to INSTALLATION - Step 3
INSPECT FOR FUEL LEAK
Refer to PRECAUTION