Fuel Pump: Reassembly: Reassembly

INSTALL FUEL PUMP
1. Connect the fuel pump harness.
  
  Fig 1: Identifying Fuel Pump Harness
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Apply gasoline to the collar and a new O-ring, and then install them into the fuel filter.
  
  Fig 2: Identifying O-Ring & Collar
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  NOTE:
  - Do not remove the suction filter from the fuel pump, because they are nonreusable parts.
3. Engage the 5 claws of the fuel pump.
  
  Fig 3: Identifying Fuel Pump Filter Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  NOTE:
  - Do not remove the suction filter.
  - Do not use either the fuel pump or the suction filter if the suction filter is removed from the fuel pump.
4. Engage the 2 claws of the fuel suction support.
5. Engage the 4 claws of the fuel suction support and install the fuel filter and the fuel pump onto the fuel sub-tank.
  
  Fig 4: Identifying Fuel Filter Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
6. Connect the fuel pump filter hose.
  
  Fig 5: Identifying Fuel Pump Filter Hose
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
7. Connect the connector of the fuel pump harness.
  
  Fig 6: Identifying Fuel Pump Harness Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FUEL SENDER GAUGE ASSEMBLY
1. Install the fuel sender gauge by sliding it downward.
  
  Fig 7: Installing Fuel Sender Gauge
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the connector of the fuel sender gauge.
  
  Fig 8: Identifying Fuel Sender Gauge Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002