Charging System (Service Information): Generator: Installation: Installation

1. Install the wire harness clamp bracket with the bolt.
   Fig 1: Remove/Install Wire Harness Clamp Bracket

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Torque: 8.4 N*m (86 kgf*cm, 74 in.*lbf) 

2. Install the generator assembly with the 2 bolts.
   Fig 2: Locating Generator Assembly Bracket Bolts

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Bolt A 

   Torque: 21 N*m (215 kgf*cm, 16 ft.*lbf) 

   Bolt B 

   Torque: 52 N*m (530 kgf*cm, 38 ft.*lbf) 

3. Install the generator wire to terminal B with the nut.
   Fig 3: View Of Generator Wire To Terminal B With Nut

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Torque: 9.8 N*m (100 kgf*cm, 87 in.*lbf) 

4. Attach the clamp and connect the generator connector to the generator.
5. Install the 2 wire harness clamps.

Torque: 5.4 N*m (55 kgf*cm, 47 in.*lbf)