LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2013 >> tC Standard Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System (Service Information) >> Brake Actuator >> Reassembly >> Reassembly

Brake Actuator: Reassembly: Reassembly

  1. INSTALL BRAKE ACTUATOR BOLT CUSHION 
    1. Install the 4 brake actuator bolt cushions to the brake actuator bracket.
  2. INSTALL BRAKE ACTUATOR CASE COLLAR 
    1. Install the 4 brake actuator case collars to the brake actuator bolt cushions.
      NOTE: Make sure the collars are in full contact with the cushions.
  3. INSTALL BRAKE ACTUATOR BRACKET ASSEMBLY 
    1. Install the brake actuator bracket to the brake actuator with the 4 bolts.
      Fig 1: Identifying Brake Actuator Bracket Assembly Tightening Sequence
      GTY314163Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

      NOTE: Tighten the 4 bolts uniformly in alphabetical order.
scientia non olet · About LEMON Manuals