Transmission Wire: Installation: Installation

INSTALL TRANSMISSION WIRE
1. Coat the O-ring with ATF.
  
  Fig 1: Transmission Wire O-Ring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the transmission wire and lock plate to the transmission valve body assembly with the bolt.
  Torque: 11 N*m (110 kgf*cm, 8 ft.*lbf)
3. Install the transmission wire to the clamp.
4. Install the transmission wire and lock plate to the transmission valve body assembly with the bolt.
  Torque: 11 N*m (110 kgf*cm, 8 ft.*lbf)
5. Connect the 8 connectors.
INSTALL TRANSMISSION VALVE BODY ASSEMBLY See step 3
INSTALL VALVE BODY OIL STRAINER ASSEMBLY See step 54
INSTALL TRANSMISSION OIL CLEANER MAGNET See step 55
INSTALL AUTOMATIC TRANSAXLE OIL PAN GASKET See step 56
INSTALL AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY See step 57
ADJUST AUTOMATIC TRANSAXLE FLUID
Refer to ADJUSTMENT
INSTALL NO. 1 ENGINE UNDER COVER . Refer to INSTALLATION - Step 83