Fuel Pressure Pulsation Damper: Installation: Installation
- INSTALL FUEL PRESSURE PULSATION DAMPER ASSEMBLY
- Apply a light coat of gasoline or spindle oil to a new O-ring, and then install the O-ring to the fuel pressure pulsation damper.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
TEXT IN ILLUSTRATION*1 New O-Ring - Install the fuel pressure pulsation damper with the 2 bolts.
Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
NOTE: Make sure that the O-ring is not cracked or jammed when installing the damper.
- Apply a light coat of gasoline or spindle oil to a new O-ring, and then install the O-ring to the fuel pressure pulsation damper.
- CONNECT FUEL TUBE SUB-ASSEMBLY See step 4
- INSTALL FUEL HOSE BRACKET See step 5
- INSTALL AIR CLEANER CAP SUB-ASSEMBLY . Refer to INSTALLATION - Step 4
- CONNECT CABLE TO NEGATIVE BATTERY TERMINAL NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Refer to INITIALIZATION .
- INSPECT FOR FUEL LEAK See step 10