LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2013 >> iQ EV >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 89 (Occupant Classification System (Diagnostics - Introduction) (Except Electric)) >> Occupant Classification System >> DTC Check / Clear >> DTC Check / Clear

DTC Check / Clear

WARNING: This page is about a different variant/trim than selected.
  1. CHECK DTC 
    1. Turn the ignition switch off.
    2. Connect the Techstream to the DLC3.
    3. Turn the ignition switch to ON and turn the Techstream on.
    4. Enter the following menus: Body Electrical / Occupant Detection / Trouble Codes.

      HINT: 

      Refer to Techstream operator's manual for further details.

  2. CLEAR DTC 
    1. Turn the ignition switch off.
    2. Connect the Techstream to the DLC3.
    3. Turn the ignition switch to ON and turn the Techstream on.
    4. Enter the following menus: Body Electrical / Occupant Detection / Trouble Codes.
    5. Clear the DTCs.

      HINT: 

      Refer to Techstream operator's manual for further details.

scientia non olet · About LEMON Manuals