LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2013 >> iQ Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 74 (Smart Key System (Entry Function) (Diagnostics - Introduction) (Electric)) >> SMART KEY SYSTEM (for Entry Function) >> Diagnosis System >> Diagnosis System

Diagnosis System

WARNING: This page is about a different variant/trim than selected.
  1. DESCRIPTION 
    1. Smart key system (for Entry Function) data and Diagnostic Trouble Codes (DTCs) can be read through the vehicle Data Link Connector 3 (DLC3). In some cases, a malfunction may be occurring in the smart key system. When the system seems to be malfunctioning, use the Techstream to check for malfunctions and perform repairs.
  2. CHECK DLC3 
    1. Check the DLC3. Refer to GENERAL INFORMATION .
  3. INSPECT AUXILIARY BATTERY VOLTAGE 
    1. Measure the vehicle auxiliary battery voltage with the power switch off.

      Standard voltage

      11 to 14 V

      If the voltage is below 11 V, recharge or replace the vehicle auxiliary battery.