LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2013 >> iQ Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Occupant Classification System (Diagnostics - Introduction) (Electric)) >> Occupant Classification System >> DTC Check / Clear >> DTC Check / Clear

DTC Check / Clear

WARNING: This page is about a different variant/trim than selected.
  1. DTC CHECK 
    1. Turn the power switch off.
    2. Connect the Techstream to the DLC3.
    3. Turn the power switch on (IG).
    4. Turn the Techstream on.
    5. Enter the following menus: Body Electrical / Occupant Detection / Trouble Codes.
    6. Check for DTCs by following the prompts on the Techstream screen.

      HINT: 

      Refer to the Techstream operator's manual for further details.

  2. DTC CLEAR 
    1. Turn the power switch off.
    2. Connect the Techstream to the DLC3.
    3. Turn the power switch on (IG).
    4. Turn the Techstream on.
    5. Enter the following menus: Body Electrical / Occupant Detection / Trouble Codes.
    6. Clear the DTCs by following the prompts on the Techstream screen.

      HINT: 

      Refer to the Techstream operator's manual for further details.

scientia non olet · About LEMON Manuals