Mass Air Flow Meter: Installation: Installation

INSTALL MASS AIR FLOW METER
1. Install the mass air flow meter onto the air cleaner cap sub-assembly with the 2 screws.
  Reference
  
  Torque: 0.7 N*m (7 kgf*cm, 6 in.*lbf)
  NOTE:
  - If a component has been dropped or subjected to a strong impact, replace it.
  - Make sure that the O-ring is not damaged or does not jump out of position during installation.
  HINT:
  
  Perform "Inspection After Repairs" after replacing the mass air flow meter. Refer to INITIALIZATION .
2. Connect the connector of the mass air flow meter.