Typical Enabling Conditions
ALL
| Battery voltage | 8 V or more |
| Ignition switch | ON |
| Starter | OFF |
P0715:
| Turbine speed (Input speed) sensor pulse input fail (P0717) | Not detected |
All of the following conditions are met:
P0717:
| The monitor will run whenever the following DTCs are not present. | P0746: Shift control solenoid DS1 performance P0776: Shift control solenoid DS2 performance |
| Output shaft speed | 300 RPM or more |
| R position signal | OFF |
| Transmission range switch fail (P0705) | Not detected |
| Engine | Running |
| Turbine speed (Input speed) sensor range check fail (P0715) | Not detected |