Customize Parameters

CUSTOMIZING FUNCTION WITH TECHSTREAM (REFERENCE)

HINT:

The following items can be customized.

NOTE:

When the customer requests a change in a function, first make sure that the function can be customized.
Record the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.

Connect a Techstream to the DLC3.
Turn the ignition switch ON.
Turn the tester on.
Enter the following menus: Body Electrical / Main Body / Utility / Customize / Wireless Door Lock.

Select the setting by referring to the table below.

MAIN BODY:

Display (Item)	Default	Contents	Setting
Wireless Control	ON	ON / OFF of wireless door lock function	ON / OFF
Hazard Answer Back	ON	When LOCK switch on transmitter pressed, all hazard warning lights illuminate once. When UNLOCK switch pressed, all hazard warning lights illuminate twice	ON / OFF
Wireless Buzzer Resp	ON	Function that makes wireless buzzer sound for answer-back when transmitter LOCK / UNLOCK switch pressed	ON / OFF
Auto Lock Time	30s	This function controls amount of time from unlocking doors to automatic re-locking function	30s / 60s
Unlock / 2 Operation	ON	Function that unlocks driver side door when unlock switch on transmitter is pressed once, and unlocks all doors when pressed twice. If setting is OFF, pressing unlock switch once makes all doors unlock.	ON / OFF
Panic Function	ON	Operates security alarm when PANIC switch on transmitter continuously pressed for 1 second	ON / OFF