LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2012 >> xB Standard Trans >> Repair and Diagnosis (Single Page) >> Steering >> Manual Steering >> Power Steering System (Diagnostics - Introduction) >> Power Steering System >> DTC Check / Clear >> DTC Check / Clear

DTC Check / Clear

  1. CHECK DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the Techstream on.
    4. Enter the following menus: Chassis / EMPS / Trouble Codes.
    5. Check the DTC(s) and freeze frame data, and then write them down.
    6. Check the details of the DTC(s). Refer to DIAGNOSTIC TROUBLE CODE CHART .
  2. CLEAR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the Techstream on.
    4. Enter the following menus: Chassis / EMPS / Trouble Codes.
    5. Clear the DTCs.
scientia non olet · About LEMON Manuals