Manual Shifting Test

HINT: 

• With this test, it can be determined whether the trouble occurs in the electrical circuit or is a mechanical problem in the transaxle.
• If any abnormalities are found in the following test, the problem is in the transaxle itself.

1. Disconnect the transmission wire connector.
   Fig 1: Performing Manual Shifting Test

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Drive with the transmission wire disconnected.

   Move the shift lever to D to check whether the shifting condition changes according to the table below.

   Shift Position	Shifting Condition
   D	No Shift (Does Not Change)
   P	P
   R	R

   HINT: 

   When driving with the transmission wire disconnected and the shift lever in D, the gear position is held in 3rd. However, when the shift lever is in R or P, the operation is the same as usual.

3. Connect the connector of the transmission wire.
4. Clear the DTC.