Typical Enabling Conditions
| The monitor will run whenever the following DTCs are not present. | P0746, P0748 (Shift solenoid valve SL1) P0776, P0778 (Shift solenoid valve SL2) P0766, P0982, P0983 (Shift solenoid valve S4) |
| Shift change | Shift change is completed before starting next shift change operation |
| ECM selected gear | 2nd, 3rd or 4th |
| Output shaft RPM | 1000 RPM or more |
| R switch | OFF |
| Engine | Running |
| Transmission range switch fail (P0705) | Not detected |
| Ignition switch | ON |
| Starter | OFF |