Ignition Switch: Removal: Removal

REMOVE LOWER STEERING COLUMN COVER
REMOVE IGNITION SWITCH ASSEMBLY
1. Disconnect the ignition switch connector.
  
  Fig 1: Identifying Ignition Switch Assembly Claw And Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. for Automatic Transaxle:
  Detach the clamp and disconnect the key interlock solenoid wire harness connector from the ignition switch connector.
3. Remove the 2 screws and ignition switch.
  
  Fig 2: View Of Ignition Switch And Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002