LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2012 >> tC Standard Trans >> Repair and Diagnosis (Single Page) >> Steering >> Power Steering >> Power Steering System (Diagnostics - Introduction) >> Power Steering System >> DTC Check / Clear >> DTC Check / Clear

DTC Check / Clear

  1. CHECK DTC 
    1. Turn the ignition switch off.
    2. Connect the Techstream to the DLC3.
    3. Turn the ignition switch to ON.
    4. Turn the Techstream on.
    5. Read the DTCs by following the display on the Techstream. Enter the following menus: Chassis / EMPS / Trouble Codes.
    6. Refer to DIAGNOSTIC TROUBLE CODE CHART  for DTC information.
  2. CLEAR DTC 
    1. Turn the ignition switch off.
    2. Connect the Techstream to the DLC3.
    3. Turn the ignition switch to ON.
    4. Turn the Techstream on.
    5. Clear the DTCs by following the display on the Techstream. Enter the following menus: Chassis / EMPS / Trouble Codes.
    6. According to the display on the Techstream, select the trouble code data display with the clear button.
    7. Turn the ignition switch off.
    8. Disconnect the Techstream from the DLC3.
scientia non olet · About LEMON Manuals