Slip Indicator Light Remains ON: Procedure

B → See step   4 

A: Go to next step 

1. Turn the ignition switch off.
2. Connect the Techstream to the DLC3.
3. Turn the ignition switch to ON.
4. Turn the Techstream on.
5. Enter the following menus: Chassis / ABS/VSC/TRAC / Data List.
   ABS/VSC/TRAC
   
   

   Tester Display	Measurement Item/Range	Normal Condition	Diagnostic Note
   Slip Indicator Light	Slip indicator light / ON or OFF	OFF	-

6. When performing the Slip Indicator Light Active Test, check Slip Indicator Light in the Data List.
   ABS/VSC/TRAC
   
   

   Tester Display	Test Part	Control Range	Diagnostic Note
   Slip Indicator Light	Slip indicator light	Indicator light ON/OFF	Observe the combination meter.

   RESULT
   
   

   Result		Proceed to
   Data List Display	Data List Display when Performing Active Test ON/OFF Operation
   ON	Does not change between ON and OFF	A
   	Changes between ON and OFF	B
   OFF	Does not change between ON and OFF	A
   	Changes between ON and OFF	B

B → See step   5 

A → See step   3