LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2012 >> tC Automatic Trans >> Repair and Diagnosis (Single Page) >> Steering >> Steering Column >> Steering Column (Service Information) >> Steering Pad Switch >> Installation >> Installation

Steering Pad Switch: Installation: Installation

  1. INSTALL STEERING PAD SWITCH LH 
    1. Attach the claw and guide to install the steering pad switch.
    2. Install the 2 screws.
    3. w/ Shift Paddle Switch:

      Connect the connector to the No. 1 switch wire (shift paddle switch).

    4. Connect the connector to the spiral cable sub-assembly.
  2. INSTALL STEERING PAD  . Refer to INSTALLATION - Step 1
  3. INSTALL LOWER NO. 2 STEERING WHEEL COVER  . Refer to INSTALLATION - Step 2
  4. INSTALL LOWER NO. 2 STEERING WHEEL COVER (w/ Cruise Control System)  . Refer to INSTALLATION - Step 3
  5. INSTALL LOWER NO. 3 STEERING WHEEL COVER  . Refer to INSTALLATION - Step 4
  6. INSPECT STEERING WHEEL CENTER POINT 
  7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    NOTE:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Refer to INITIALIZATION .

  8. INSPECT SRS WARNING LIGHT 

    Refer to DIAGNOSIS SYSTEM

scientia non olet · About LEMON Manuals