DTC P0705: Transmission Range Sensor Circuit Malfunction (PRNDL Input): Description
The park/neutral position switch and shift lock control unit assembly (transmission control switch) detect the shift lever position and send signals to the ECM.
| DTC No. |
DTC Detection Condition
- Diagnosis Condition
- Malfunction Status
- Malfunction Time
- Other
|
Trouble Area |
| P0705 |
- Ignition switch ON and battery voltage is 10.5 V or more
- Any 2 or more of following signals are ON simultaneously.
- (NSW, P, N) input signal
- R input signal
- D input signal
- B input signal
- 2 seconds
- 2-trip detection logic
|
|
- Ignition switch ON and battery voltage is 10.5 V or more
- All switches are OFF simultaneously
- NSW input signal
- P input signal
- R input signal
- N input signal
- D input signal
- B input signal
- 60 seconds
- 2-trip detection logic
|
- Ignition switch ON and battery voltage is 10.5 V or more
- When any of following conditions is met, the S (SDSW) signal is ON
- NSW input signal is ON
- P input signal is ON
- R input signal is ON
- N input signal is ON
- B input signal is ON
- 2 seconds
- 2-trip detection logic
|