Jam Protection Function does not Operate: Procedure

1. Initialize the power window regulator motor. Refer to INITIALIZATION .
2. Check if the power window auto up/down function operates. Refer to SYSTEM DESCRIPTION .

   OK

   Auto up/down function operates.

NG → See step   2 

OK → END (PROBLEM DUE TO INITIALIZATION FAILURE) 

1. Check if the jam protection function operates for applicable power window.

   HINT: 

   The jam protection function does not operate from the fully closed position of the door glass to 4 mm (0.157 in.) below that.

   OK

   Jam protection function operates.

   RESULT
   
   

   Result	Proceed to
   OK	A
   NG (Driver side power window)	B
   NG (Passenger side power window)	C

B → See step   3 

C → See step   4 

A → END