LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2011 >> tC Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System (Service Information) >> Crankshaft Position Sensor >> Removal >> Removal

Crankshaft Position Sensor: Removal: Removal

  1. REMOVE REAR ENGINE UNDER COVER RH  . Refer to REMOVAL - Step 2
  2. REMOVE CRANKSHAFT POSITION SENSOR 
    Fig 1: Locating Bolt And Sensor
    GTY314654Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Disconnect the sensor connector.
    2. Remove the bolt and sensor.
scientia non olet · About LEMON Manuals