LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2009 >> xD Standard >> Repair and Diagnosis >> Transmission >> Clutch >> Clutch Unit >> Removal

Clutch Unit: Removal

  1. REMOVE MANUAL TRANSAXLE ASSEMBLY 

    (See REMOVAL )

  2. REMOVE CLUTCH RELEASE FORK SUB-ASSEMBLY 
    1. Remove the clutch release fork with the clutch release bearing from the manual transaxle.
  3. REMOVE CLUTCH RELEASE FORK BOOT 
  4. REMOVE CLUTCH RELEASE BEARING ASSEMBLY 
    1. Remove the clutch release bearing from the clutch release fork.
  5. REMOVE RELEASE BEARING HUB CLIP 
  6. REMOVE RELEASE FORK SUPPORT 
    1. Remove the release fork support from the manual transaxle.
  7. REMOVE CLUTCH COVER ASSEMBLY 
    1. Put the matchmarks on the clutch cover assembly and the flywheel.
      2. Fig 1: Identifying Matchmarks On Clutch Cover Assembly And Flywheel
      G04831608Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Loosen each set bolt one turn at a time until the spring tension is released.
    3. Remove the set bolts and pull off the clutch cover.
      NOTE: Do not drop the clutch disc.
  8. REMOVE CLUTCH DISC ASSEMBLY 
scientia non olet · About LEMON Manuals