Manual Transaxle Assembly: Installation

INSTALL MANUAL TRANSAXLE ASSEMBLY
1. Align the input shaft with the clutch disc and install the manual transaxle onto the engine.
2. Install the 7 bolts.
  Torque: 33 N*m (336 kgf*cm, 24 ft.*lbf)
  
  Fig 1: Locating Manual Transaxle Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL ENGINE MOUNTING BRACKET LH
1. Install the engine mounting bracket LH with the 6 bolts.
  Torque: 64 N*m (653 kgf*cm, 47 ft.*lbf)
  
  Fig 2: Locating Engine Mounting Bracket LH Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL TRANSMISSION CONTROL CABLE BRACKET
1. Install the transmission control cable bracket with the 2 bolts.
  Torque: 25 N*m (255 kgf*cm, 18 ft.*lbf)
  
  Fig 3: Locating Transmission Control Cable Bracket With Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL STARTER ASSEMBLY (See INSTALLATION )
INSTALL FLYWHEEL HOUSING SIDE COVER (See INSTALLATION )
INSTALL ENGINE MOVING CONTROL BRACKET
1. Install the engine moving control bracket with the 4 bolts.
  Torque: 64 N*m (653 kgf*cm, 47 ft.*lbf)
  
  Fig 4: Locating Engine Moving Control Bracket Nuts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL ENGINE AND TRANSAXLE
HINT:

See the steps from "INSTALL FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY" through "INSPECT VSC SENSOR SIGNAL" (See INSTALLATION ).