Front Stabilizer Bar: Removal

REMOVE HOOD SUB-ASSEMBLY
REMOVE FRONT WIPER ARM HEAD CAP (See REMOVAL )
REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH (See REMOVAL )
REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH (See REMOVAL )
REMOVE HOOD TO COWL TOP SEAL (See REMOVAL )
REMOVE COWL TOP VENTILATOR LOUVER RH (See REMOVAL )
REMOVE COWL TOP VENTILATOR LOUVER LH (See REMOVAL )
REMOVE FRONT WIPER MOTOR AND LINK (See REMOVAL )
REMOVE FRONT AIR SHUTTER SEAL RH (See REMOVAL )
REMOVE OUTER COWL TOP PANEL (See REMOVAL )
POSITION WHEELS FACING STRAIGHT AHEAD
REMOVE FRONT WHEEL
REMOVE COLUMN HOLE COVER SILENCER SHEET (See REMOVAL )
REMOVE STEERING SLIDING YOKE SUB-ASSEMBLY (See REMOVAL )
REMOVE NO. 1 STEERING COLUMN HOLE COVER SUB-ASSEMBLY (See REMOVAL )
SEPARATE TIE ROD END SUB-ASSEMBLY LH (See REMOVAL )
SEPARATE TIE ROD END SUB-ASSEMBLY RH
HINT:

The removal procedure for the RH side is the same as that for the LH side.
SEPARATE FRONT LOWER SUSPENSION ARM SUB-ASSEMBLY LH (See REMOVAL )
SEPARATE FRONT LOWER SUSPENSION ARM SUB-ASSEMBLY RH
HINT:

The removal procedure for the RH side is the same as that for the LH side.
REMOVE FRONT STABILIZER LINK ASSEMBLY LH
1. Remove the 2 nuts and stabilizer link
  HINT:
  
  If the ball joint turns together with the nut, use a socket hexagon wrench 6 to hold the stud.
  
  Fig 1: Locating Nuts And Stabilizer Link
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT STABILIZER LINK ASSEMBLY RH
HINT:

The removal procedure for the RH side is the same as that for the LH side.
SUSPEND ENGINE ASSEMBLY (See REMOVAL )
REMOVE FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY (See REMOVAL )
REMOVE POWER STEERING GEAR (See REMOVAL )
REMOVE FRONT STABILIZER NO. 1 BRACKET LH
1. Remove the 2 bolts and the stabilizer bracket.
REMOVE FRONT STABILIZER NO. 1 BRACKET RH
1. Remove the 2 bolts and the stabilizer bracket.
REMOVE FRONT STABILIZER BAR
REMOVE FRONT STABILIZER BAR NO. 1 BUSH