Front Seat Inner Belt Assembly: Inspection

INSPECT FRONT SEAT INNER BELT ASSEMBLY LH

for Driver Side:

Check the resistance.

Using an ohmmeter, measure the resistance between the terminals.

Standard resistance

STANDARD RESISTANCE SPECIFICATIONS

Tester Connection	Condition	Specified Condition
3 - 4	Tongue plate fastened	10 kΩ or higher
3 - 4	Tongue plate released	Below 1 Ω

If the result is not as specified, replace the front seat inner belt.

Fig 1: Measuring Resistance Between Terminals (Driver Side)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

for Front Passenger Side:

Check the resistance.

Using an ohmmeter, measure the resistance between the terminals.

Standard resistance

STANDARD RESISTANCE SPECIFICATIONS

Tester Connection	Condition	Specified Condition
1 - 2	Tongue plate fastened	10 kΩ or higher
1 - 2	Tongue plate released	Below 1 Ω

If the result is not as specified, replace the front seat inner belt.

Fig 2: Measuring Resistance Between Terminals (Passenger Side)