Seat Position Sensor: Removal

CAUTION: Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing (See PRECAUTION ).

NOTE: Always use "TORX" socket wrench E10 when removing the front seat.

HINT:

Installation is in the reverse order of removal.

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
REMOVE FRONT SEAT ASSEMBLY LH (See REMOVAL )
REMOVE SEAT SLIDE POSITION SENSOR PROTECTOR
1. Disengage the pin and remove the seat position sensor protector.
REMOVE SEAT POSITION AIRBAG SENSOR
1. Disconnect the connector from the seat position airbag sensor.
  
  Fig 1: Identifying Seat Position Airbag Sensor
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Using "TORX" socket wrench T30, remove the torx screw and the seat position airbag sensor.