Air Conditioning: Condenser: Reassembly

INSTALL COOLER DRYER
1. Using pliers, install the cooler dryer onto the modulator.
  
  Fig 1: Installing Cooler Dryer Onto Modulator
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Apply sufficient compressor oil to the O-ring and the fitting surface of the cap.
  Compressor oil:
  
  ND-OIL 8 or equivalent
  
  Fig 2: Locating O-Ring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Using a 14 mm straight hexagon wrench, install the cap onto the cooler condenser core.
  Torque: 2.9 N*m (30 kgf*cm, 26 in.*lbf)
  
  Fig 3: Installing Cap Onto Cooler Condenser Core
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002