On-Vehicle Inspection
- INSPECT CONDENSER ASSEMBLY
- If the fins of the cooler condenser are dirty, clean them with water and dry them with compressed air.NOTE: Do not damage the fins of the condenser assembly.
- If the fins of the cooler condenser are bent, straighten them using a screwdriver or pliers.
- If the fins of the cooler condenser are dirty, clean them with water and dry them with compressed air.
- CHECK CONDENSER FOR REFRIGERANT LEAKAGE
- Check the pipe joints for gas leakage, using a halogen leak detector.
- Check the tightening torque of the joints if gas leakage is detected from any pipe joints.