LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2009 >> xD Standard >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Air Conditioning >> Blower Unit >> Disassembly

Blower Unit: Disassembly

  1. REMOVE NO. 1 AIR DUCT SUB-ASSEMBLY 
    1. Disengage the 2 claws and remove the air duct.
      Fig 1: Identifying Air Duct Claws
      G05401757Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE AIR INLET DAMPER CONTROL CABLE SUB-ASSEMBLY 
    1. Disengage the 3 claws and remove the air inlet damper control cable.
      Fig 2: Identifying Air Inlet Damper Control Cable Claws
      G05401758Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE FRONT BLOWER MOTOR 
    1. Remove the 3 screws and the blower motor.
      Fig 3: Locating Front Blower Motor Screws
      G05401759Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE BLOWER RESISTOR 
    1. Remove the 2 screws and the blower resistor.
      Fig 4: Locating Blower Resistor Screws
      G05401760Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE AIR FILTER CASE 
    1. Pinch portion A to disengage the claw and remove the air filter case.
      Fig 5: Disengaging Claw
      G05401761Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. REMOVE CLEAN AIR FILTER (w/ Clean Air Filter) 
    1. Remove the clean air filter from the blower unit.
      Fig 6: Removing Clean Air Filter From Blower Unit
      G05401762Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals