LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2009 >> xD Standard >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> 2ZR-FE Lubrication >> Oil Pump >> Removal

Oil Pump: Removal

  1. DISCHARGE FUEL SYSTEM PRESSURE 

    (See PRECAUTION )

  2. REMOVE BATTERY  (See REMOVAL )
  3. REMOVE BATTERY TRAY 
  4. REMOVE FRONT WHEELS 
  5. REMOVE ENGINE UNDER COVER LH 
  6. REMOVE ENGINE UNDER COVER RH 
  7. DRAIN ENGINE COOLANT  (See REPLACEMENT )
  8. DRAIN ENGINE OIL  (See REPLACEMENT  )
  9. REMOVE FRONT WIPER ARM HEAD CAP  (See REMOVAL )
  10. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH  (See REMOVAL )
  11. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH  (See REMOVAL )
  12. REMOVE HOOD TO COWL TOP SEAL  (See REMOVAL )
  13. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY  (See REMOVAL )
  14. REMOVE COWL TOP VENTILATOR LOUVER LH  (See REMOVAL )
  15. REMOVE FRONT WIPER MOTOR AND LINK  (See REMOVAL )
  16. REMOVE FRONT AIR SHUTTER SEAL RH  (See REMOVAL )
  17. REMOVE OUTER COWL TOP PANEL  (See REMOVAL )
  18. REMOVE AIR CLEANER ASSEMBLY  (See REMOVAL )
  19. REMOVE AIR CLEANER BRACKET  (See REMOVAL )
  20. REMOVE BATTERY CARRIER  (See REMOVAL )
  21. REMOVE NO. 2 CYLINDER HEAD COVER  (See REMOVAL )
  22. REMOVE FAN AND GENERATOR V BELT  (See REMOVAL )
  23. REMOVE NO. 2 RADIATOR HOSE  (See REMOVAL )
  24. DISCONNECT NO. 1 RADIATOR HOSE  (See REMOVAL )
  25. REMOVE FRONT BUMPER COVER  (See REMOVAL )
  26. DISCONNECT NO. 1 OIL COOLER OUTLET HOSE (for Automatic Transaxle)  (See REMOVAL )
  27. DISCONNECT NO. 2 OIL COOLER INLET HOSE (for Automatic Transaxle)  (See REMOVAL )
  28. REMOVE HOOD LOCK ASSEMBLY  (See REMOVAL )
  29. REMOVE NO. 1 COOLER COVER  (See REMOVAL )
  30. REMOVE UPPER RADIATOR SUPPORT ABSORBER  (See DISASSEMBLY )
  31. REMOVE UPPER RADIATOR SUPPORT SUB-ASSEMBLY  (See REMOVAL )
  32. REMOVE RADIATOR ASSEMBLY  (See REMOVAL )
  33. SEPARATE WITH PULLEY COMPRESSOR ASSEMBLY  (See REMOVAL )
  34. SEPARATE TRANSMISSION CONTROL CABLE ASSEMBLY (for Automatic Transaxle)  (See REMOVAL )
  35. SEPARATE TRANSMISSION CONTROL CABLE ASSEMBLY (for Manual Transaxle)  (See REMOVAL )
  36. SEPARATE UNION TO CHECK VALVE HOSE  (See REMOVAL )
  37. SEPARATE NO. 1 FUEL VAPOR FEED HOSE  (See REMOVAL )
  38. DISCONNECT ENGINE WIRE  (See REMOVAL )
  39. DISCONNECT HEATER WATER OUTLET HOSE A(FROM HEATER UNIT)  (See REMOVAL )
  40. DISCONNECT HEATER WATER INLET HOSE A  (See REMOVAL )
  41. DISCONNECT FUEL TUBE SUB-ASSEMBLY  (See REMOVAL )
  42. SEPARATE CLUTCH RELEASE CYLINDER ASSEMBLY (for Manual Transaxle)  (See REMOVAL )
  43. REMOVE COLUMN HOLE COVER SILENCER SHEET  (See REMOVAL )
  44. SEPARATE STEERING SLIDING YOKE SUB-ASSEMBLY  (See REMOVAL )
  45. SEPARATE NO. 1 STEERING COLUMN HOLE COVER SUB-ASSEMBLY  (See REMOVAL )
  46. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)  (See REMOVAL )
  47. REMOVE CONSOLE PANEL UPPER  (See REMOVAL )
  48. REMOVE CONSOLE BOX REAR COVER  (See REMOVAL )
  49. REMOVE CONSOLE BOX CARPET  (See REMOVAL )
  50. REMOVE REAR CONSOLE BOX ASSEMBLY  (See REMOVAL )
  51. REMOVE FRONT CONSOLE BOX  (See REMOVAL )
  52. REMOVE FRONT FLOOR BRACE CENTER  (See REMOVAL )
  53. REMOVE FRONT EXHAUST PIPE ASSEMBLY  (See REMOVAL )
  54. REMOVE FRONT AXLE SHAFT LH NUT  (See REMOVAL )
  55. REMOVE FRONT AXLE SHAFT RH NUT 

    HINT:

    The removal procedure for the RH side is the same as that for the LH side.

  56. SEPARATE SPEED SENSOR FRONT LH  (See REMOVAL )
  57. SEPARATE SPEED SENSOR FRONT RH 

    HINT:

    The removal procedure for the RH side is the same as that for the LH side.

  58. SEPARATE TIE ROD END SUB-ASSEMBLY LH  (See REMOVAL )
  59. SEPARATE TIE ROD END SUB-ASSEMBLY RH 

    HINT:

    The removal procedure for the RH side is the same as that for the LH side.

  60. SEPARATE FRONT STABILIZER LINK ASSEMBLY LH  (See REMOVAL )
  61. SEPARATE FRONT STABILIZER LINK ASSEMBLY RH 

    HINT:

    The removal procedure for the RH side is the same as that for the LH side.

  62. SEPARATE FRONT LOWER SUSPENSION ARM SUB-ASSEMBLY LH  (See REMOVAL )
  63. SEPARATE FRONT LOWER SUSPENSION ARM SUB-ASSEMBLY RH 

    HINT:

    The removal procedure for the RH side is the same as that for the LH side.

  64. SEPARATE FRONT AXLE ASSEMBLY LH  (See REMOVAL )
  65. SEPARATE FRONT AXLE ASSEMBLY RH 

    HINT:

    The removal procedure for the RH side is the same as that for the LH side.

  66. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE  (See REMOVAL )
  67. REMOVE FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY  (See REMOVAL )
  68. REMOVE NO. 1 OIL COOLER INLET TUBE (for Automatic Transaxle)  (See REMOVAL )
  69. REMOVE NO. 1 OIL COOLER OUTLET TUBE (for Automatic Transaxle)  (See REMOVAL )
  70. REMOVE NO. 2 OIL COOLER TUBE CLAMP (for Automatic Transaxle)  (See REMOVAL )
  71. REMOVE TRANSMISSION OIL LEVEL GAGE SUB-ASSEMBLY (for Automatic Transaxle) 
  72. SEPARATE TRANSMISSION OIL FILLER TUBE SUB-ASSEMBLY (for Automatic Transaxle)  (See REMOVAL )
  73. REMOVE INTAKE MANIFOLD  (See REMOVAL )
  74. REMOVE OIL LEVEL DIPSTICK 
  75. REMOVE OIL LEVEL GAGE GUIDE  (See REMOVAL )
  76. REMOVE GENERATOR ASSEMBLY  (See REMOVAL )
  77. REMOVE FAN BELT ADJUSTING BAR  (See REMOVAL )
  78. SEPARATE WATER INLET HOSE  (See REMOVAL )
  79. SEPARATE NO. 3 WATER BY-PASS HOSE  (See REMOVAL )
  80. REMOVE WATER INLET  (See REMOVAL )
  81. REMOVE THERMOSTAT  (See REMOVAL )
  82. REMOVE IGNITION COIL ASSEMBLY  (See REMOVAL )
  83. REMOVE RADIO SETTING CONDENSER  (See REMOVAL )
  84. REMOVE NO. 2 VENTILATION HOSE  (See REMOVAL )
  85. REMOVE AIR TUBE ASSEMBLY  (See REMOVAL )
  86. REMOVE CYLINDER HEAD COVER SUB-ASSEMBLY  (See DISASSEMBLY )
  87. SET NO. 1 CYLINDER TO TDC / COMPRESSION  (See DISASSEMBLY )
  88. REMOVE CRANKSHAFT PULLEY  (See DISASSEMBLY )
  89. REMOVE NO. 1 CHAIN TENSIONER ASSEMBLY  (See DISASSEMBLY )
  90. REMOVE TIMING CHAIN OR BELT COVER SUB-ASSEMBLY  (See DISASSEMBLY )
  91. REMOVE TIMING CHAIN OR BELT COVER OIL SEAL 
    1. Using a screwdriver and hammer, remove the oil seal
      NOTE: Be careful not to damage the timing chain or belt cover sub-assembly.

      HINT:

      Tape the screwdriver tip before use.

      Fig 1: Removing Oil Seal
      G05399741Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  92. REMOVE NO. 2 CHAIN VIBRATION DAMPER  (See DISASSEMBLY )
  93. REMOVE CHAIN TENSIONER SLIPPER  (See DISASSEMBLY )
  94. REMOVE NO. 1 CHAIN VIBRATION DAMPER  (See DISASSEMBLY )
  95. REMOVE CHAIN SUB-ASSEMBLY  (See DISASSEMBLY )
  96. REMOVE CRANKSHAFT TIMING GEAR OR SPROCKET  (See DISASSEMBLY )
  97. REMOVE NO. 2 CHAIN SUB-ASSEMBLY  (See DISASSEMBLY )
  98. REMOVE NO. 2 OIL PAN SUB-ASSEMBLY  (See DISASSEMBLY )
  99. REMOVE OIL PUMP ASSEMBLY 
    1. Remove the 3 bolts and remove the oil pump assembly.
      Fig 2: Locating Oil Pump Assembly Bolts
      G05399742Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals