Oil Pressure Switch: Installation

1. Apply adhesive to 2 or 3 threads of the oil pressure switch.

   Adhesive: 

   Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent 

   Fig 1: Applying Adhesive To 2 Or 3 Threads Of Oil Pressure Switch

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Using a 24 mm deep socket wrench, install the oil pressure switch.

   Torque: 15 N*m (153 kgf*cm, 11 ft.*lbf) 

   NOTE: Do not start the engine for at least 1 hour after installation.
3. Connect the oil pressure switch connector.
Fig 2: Identifying Oil Pressure Switch Connector
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Torque: 103 N*m (1050 kgf*cm, 76 ft.*lbf)