Rear Axle Hub: Removal

REMOVE REAR WHEEL
REMOVE REAR BRAKE DRUM SUB-ASSEMBLY (See REMOVAL )
DISCONNECT SPEED SENSOR WIRE
1. Using a screwdriver, remove the claw of the connector lock portion and disconnect the skid control sensor wire connector.
  NOTE: Do not remove the connector cover from the connector because the skid control sensor wire may be damaged.
  
  Fig 1: Disconnecting Skid Control Sensor Wire Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE REAR AXLE HUB AND BEARING ASSEMBLY
1. Remove the 4 bolts and remove the axle hub and bearing from the axle beam.
  NOTE: Suspend the backing plate with a piece of rope.
  
  Fig 2: Locating Bolts And Axle Hub
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002