LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2009 >> xD Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Brakes - Abs >> Steering Angle Sensor >> Removal

Steering Angle Sensor: Removal

CAUTION: Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing (See PRECAUTION ).
  1. TURN FRONT WHEELS FACING STRAIGHT AHEAD 
  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait for 90 seconds after disconnecting the cable to prevent airbag deployment.
  3. REMOVE STEERING PAD  (See REMOVAL )
  4. REMOVE STEERING WHEEL ASSEMBLY  (See REMOVAL )
  5. REMOVE STEERING COLUMN LOWER COVER  (See REMOVAL )
  6. REMOVE STEERING COLUMN UPPER COVER  (See REMOVAL )
  7. REMOVE SPIRAL CABLE  (See REMOVAL )
  8. REMOVE STEERING ANGLE SENSOR 
    1. Disengage the 6 claws and 2 pins, and remove the steering angle sensor from the spiral cable.
      2. Fig 1: Identifying Steering Angle Sensor Claws And Pins
      G05401304Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals