Outer Rear View Mirror: Inspection

INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH
1. Check the operation.
  1. Connect the positive (+) lead from the battery to terminal 4 (MV) and the negative (-) lead to terminal 5 (M+), then check that the mirror turns upward.
    OK:
    
    Turns upward
    
    If the result is not as specified, replace the outer rear view mirror.
    
    Fig 1: Inspecting Outer Rear View Mirror Assembly LH
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. Connect the positive (+) lead from the battery to terminal 5 (M+) and the negative (-) lead to terminal 4 (MV), then check that the mirror turns downward.
    OK:
    
    Turns downward
    
    If the result is not as specified, replace the outer rear view mirror.
  3. Connect the positive (+) lead from the battery to terminal 3 (MH) and the negative (-) lead to terminal 5 (M+), then check that the mirror turns left.
    OK:
    
    Turns left
    
    If the result is not as specified, replace the outer rear view mirror.
  4. Connect the positive (+) lead from the battery to terminal 5 (M+) and the negative (-) lead to terminal 3 (MH), then check that the mirror turns right.
    OK:
    
    Turns right
    
    If the result is not as specified, replace the outer rear view mirror.
INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH
1. Check the operation.
  1. Connect the positive (+) lead from the battery to terminal 4 (MV) and the negative (-) lead to terminal 5(M+), then check that the mirror turns upward.
    OK:
    
    Turns upward
    
    If the result is not as specified, replace the outer rear view mirror.
    
    Fig 2: Inspecting Outer Rear View Mirror Assembly RH
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. Connect the positive (+) lead from the battery to terminal 5 (M+) and the negative (-) lead to terminal 4 (MV), then check that the mirror turns downward.
    OK:
    
    Turns downward
    
    If the result is not as specified, replace the outer rear view mirror.
  3. Connect the positive (+) lead from the battery to terminal 3 (MH) and the negative (-) lead to terminal 5 (M+), then check that the mirror turns left.
    OK:
    
    Turns left
    
    If the result is not as specified, replace the outer rear view mirror.
  4. Connect the positive (+) lead from the battery to terminal 5 (M+) and the negative (-) lead to terminal 3 (MH), then check that the mirror turns right.
    OK:
    
    Turns right
    
    If the result is not as specified, replace the outer rear view mirror.