Outer Mirror Switch: Inspection

INSPECT OUTER MIRROR SWITCH

The L position of the left/right adjustment switch: Measure the resistance of the outer mirror switch.

Standard resistance (for left side)

STANDARD RESISTANCE FOR LEFT SIDE

Tester Connection	Switch Condition	Specified Condition
4 (VL) - 8 (B) 6 (M+) - 7 (E)	UP	Below 1 Ω
4 (VL) - 8 (B) 6 (M+) - 7 (E)	OFF	10 kΩ or higher
4 (VL) - 7 (E) 6 (M+) - 8 (B)	DOWN	Below 1 Ω
4 (VL) - 7 (E) 6 (M+) - 8 (B)	OFF	10 kΩ or higher
5 (HL) - 8 (B) 6 (M+) - 7 (E)	LEFT	Below 1 Ω
5 (HL) - 8 (B) 6 (M+) - 7 (E)	OFF	10 kΩ or higher
5 (HL) - 7 (E) 6 (M+) - 8 (B)	RIGHT	Below 1 Ω
5 (HL) - 7 (E) 6 (M+) - 8 (B)	OFF	10 kΩ or higher

If the result is not as specified, replace the outer mirror switch.

Fig 1: Inspecting Outer Mirror Switch

G05391368

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

The R position of the left/right adjustment switch: Measure the resistance of the outer mirror switch.

Standard resistance (for right side)

STANDARD RESISTANCE FOR RIGHT SIDE

Tester Connection	Switch Condition	Specified Condition
3 (VR) - 8 (B) 6 (M+)-7(E)	UP	Below 1 Ω
3 (VR) - 8 (B) 6 (M+)-7(E)	OFF	10 kΩ or higher
3 (VR) - 7 (E) 6 (M+) - 8 (B)	DOWN	Below 1 Ω
3 (VR) - 7 (E) 6 (M+) - 8 (B)	OFF	10 kΩ or higher
2 (HR) - 8 (B) 6 (M+) - 7 (E)	LEFT	Below 1 Ω
2 (HR) - 8 (B) 6 (M+) - 7 (E)	OFF	10 kΩ or higher
2 (HR) - 7 (E) 6 (M+) - 8 (B)	RIGHT	Below 1 Ω
2 (HR) - 7 (E) 6 (M+) - 8 (B)	OFF	10 kΩ or higher

If the result is not as specified, replace the outer mirror switch.