LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2009 >> xD Automatic >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Door Lock >> Back Door Lock >> Inspection

Back Door Lock: Inspection

  1. INSPECT BACK DOOR LOCK 
    1. Check the operation.
      1. Move the back door lock to the lock position.
      2. Connect the positive (+) lead from the battery to terminal 2 (ACT+) and the negative (-) lead to terminal 1 (ACT-), then check that the lock unlocks.

        OK: Unlocks 

        If the result is not as specified, replace the back door lock.

        Fig 1: Identifying Back Door Lock Connector Terminals
        G05391084Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Check operation of the back door courtesy switch.
      1. Measure the resistance according to the value(s) in the table below.
        Fig 2: Identifying Back Door Lock Connector Terminals
        G05391085Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

        Standard resistance 

        RESISTANCE SPECIFICATION

        Tester Connection Switch Condition Specified Condition
        1 (ACT-) - 3 (D+) Locked 10 kΩ or higher
        1 (ACT-) - 3 (D+) Unlocked Below 1 Ω

        If the result is not specified, replace the back door lock.

scientia non olet · About LEMON Manuals