LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2009 >> xB Standard >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering System >> DTC Check / Clear

DTC Check / Clear

  1. CHECK DTC 
    1. Turn the ignition switch to OFF.
    2. Connect the Techstream to the DLC3.
    3. Turn the ignition switch to ON.
    4. Turn the Techstream on.
    5. Enter the following menus: Chassis / EMPS / Trouble Codes/
    6. Read the DTCs by following the prompts on the intelligent tester or Techstream.

      HINT:

      Refer to the intelligent tester or Techstream operator's manual for further details.

  2. CLEAR DTC 
    1. Turn the ignition switch to OFF.
    2. Connect the Techstream to the DLC3.
    3. Turn the Techstream on.
    4. Enter the following menus: Chassis / EMPS / Trouble Codes/
    5. Clear the DTCs by following the prompts on the Techstream.
    6. Turn the ignition switch to OFF.
    7. Disconnect the Techstream from the DLC3.
scientia non olet · About LEMON Manuals