LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2009 >> xB Standard >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt >> Seat Belt Warning System >> Customize Parameters

Customize Parameters

  1. CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER OR TECHSTREAM (REFERENCE) 
    NOTE:
    • When the customer requests a change in a function, first make sure that the function can be customized.
    • Be sure to make a note of the current settings before customizing.
    • When troubleshooting a function, first make sure that the function is set to the default setting.
    1. Connect an intelligent tester or Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the tester ON.
    4. Enter the following menus: Utility / Customize
    5. Select the setting by referring to the table below.
      1. Warning: 
      2. HINT:

        When the buzzer OFF setting is selected, the buzzer activation while the vehicle is being driven is cancelled. However, the buzzer activation when the ignition switch is turned to ON cannot be cancelled.

        TECHSTREAM - WARNING

        Display (Item) Default Contents Setting
        D-Seatbelt Warning Buzzer ON Seat belt warning buzzer ON/OFF setting ON Driver buzzer ON
        OFF Driver buzzer OFF
        P-Seatbelt Warning Buzzer ON Seat belt warning buzzer ON/OFF setting ON Passenger buzzer ON
        OFF Passenger buzzer OFF
scientia non olet · About LEMON Manuals