LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2009 >> xB Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (U241E Automatic Transaxle) >> Speed Sensor >> Inspection

Speed Sensor: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. INSPECT SPEED SENSOR NT 
    1. Measure the resistance.

      Standard resistance 

      TESTER CONNECTION SPECIFIED CONDITION CHART

      Tester Connection Condition Specified Condition
      1-2 20°C (68°F) 560 to 680 Ω

      If the resistance value is not as specified, replace the speed sensor NT.

      Fig 1: Identifying Speed Sensor NT Connector Terminals
      G05388027Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSPECT SPEED SENSOR NC 
    1. Measure the resistance.

      Standard resistance 

      TESTER CONNECTION SPECIFIED CONDITION CHART

      Tester Connection Condition Specified Condition
      1-2 20°C (68°F) 560 to 680 Ω
      Fig 2: Identifying Speed Sensor NC Connector Terminals
      G05388028Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      If the resistance value is not as specified, replace the speed sensor NC.

scientia non olet · About LEMON Manuals