LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2009 >> xB Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Windshield/Window Glass) >> Rear Power Window Switch >> Inspection

Rear Power Window Switch: Inspection

WARNING: This page is about a different car, the 2008 Scion xB. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT REAR POWER WINDOW SWITCH 
    1. Check the resistance.
      1. Measure the resistance according to the value(s) in the table below.

        Standard resistance 

        TESTER CONNECTION SPECIFIED CONDITION CHART

        Tester Connection Switch Connection Specified Condition
        1 (D) - 2 (SD)
        3 (B) - 4 (U)
        UP Below 1 Ω
        1 (D) - 2 (SD)
        4 (U) - 5 (SU)
        OFF Below 1 Ω
        1 (D) - 3 (B)
        4 (U) - 5 (SU)
        DOWN Below 1 Ω

        If the result is not as specified, replace the rear power window switch.

        Fig 1: Identifying Rear Power Window Switch Connector Terminals
        G05391267Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002