LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2009 >> xB Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Lighting) >> Stop Light Switch >> Inspection

Stop Light Switch: Inspection

WARNING: This page is about a different car, the 2008 Scion xB. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT STOP LIGHT SWITCH 
    Fig 1: Inspecting Stop Light Switch
    G05390846Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Check the resistance.
      1. Measure the resistance according to the value(s) in the table below.

        Standard resistance 

        RESISTANCE SPECIFICATION

        Tester Connection Switch Condition Specified Condition
        1 - 2 Not pushed Below 1 Ω
        1 - 2 Pushed 10 kΩ or higher
        3 - 4 Not pushed 10 kΩ or higher
        3 - 4 Pushed Below 1 Ω

        If the result is not as specified, replace the stop light switch.

scientia non olet · About LEMON Manuals