License Plate Light Assembly: Installation

WARNING: This page is about a different car, the 2008 Scion xB. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL LICENSE PLATE LIGHT BULB
1. Install the license plate light bulb into the light socket.
2. Turn the license plate light socket and bulb, in the direction indicated by the arrow in the illustration, to install them.
  
  Fig 1: Installing License Plate Light Bulb
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL LICENSE PLATE LIGHT ASSEMBLY
1. Connect the connector.
2. Engage the 2 claws and install the license plate light, as shown in the illustration.
Fig 2: Identifying License Plate Light Claws
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL BACK DOOR OUTSIDE GARNISH (See INSTALLATION )
INSTALL BACK DOOR TRIM BOARD ASSEMBLY (See REASSEMBLY )