Back-Up Light Assembly: Removal

WARNING: This page is about a different car, the 2008 Scion xB. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE BACK-UP LIGHT ASSEMBLY
1. Disconnect the connector.
2. Remove the screw.
  
  Fig 1: Locating Back-Up Light Assembly Screw
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Disengage the 2 claws and remove the back-up light.
  
  Fig 2: Identifying Back-Up Light Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE BACK-UP LIGHT BULB
1. Turn the back-up light socket and bulb, in the direction indicated by the arrow in the illustration, to remove them.
2. Remove back-up light bulb from the light socket.
  
  Fig 3: Removing Back-Up Light Bulb
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002