2AZ-FE Starting: Starter: Disassembly

REMOVE MAGNET SWITCH BODY
1. Remove the nut and disconnect the lead wire from terminal C.
  
  Fig 1: Locating Magnetic Switch Body Nut
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the 2 screws that hold the magnetic switch to the motor terminal starter kit.
3. Remove the magnet switch body.
4. Remove the return spring and the plunger from the magnet switch body.
  
  Fig 2: Locating Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE STARTER YOKE ASSEMBLY
1. Remove the 2 through bolts and pull out the starter yoke assembly together with the starter commutator end frame assembly.
  
  Fig 3: Locating Starter Yoke Assembly Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the starter yoke assembly from the starter commutator end frame assembly.
  
  Fig 4: Identifying Starter Wire Terminal
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE STARTER ARMATURE PLATE
1. Remove the starter armature plate from the starter yoke assembly.
  
  Fig 5: Identifying Starter Armature Plate
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE STARTER COMMUTATOR END FRAME COVER
1. Using a screwdriver, remove the starter commutator end frame cover.
  
  Fig 6: Removing Starter Commutator End Frame Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE STARTER ARMATURE ASSEMBLY
1. Using snap ring pliers, remove the snap ring and plate washer.
2. Remove the starter armature assembly from the commutator end frame assembly.
  
  Fig 7: Removing Snap Ring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE PLANETARY GEAR
1. Remove the 3 planetary gears from the motor terminal starter kit.