Outer Rear View Mirror: Installation

INSTALL OUTER REAR VIEW MIRROR ASSEMBLY
1. Install the outer rear view mirror assembly.
2. Install the 3 nuts.
  Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf)
  
  Fig 1: Identifying Outer Rear View Mirror Assembly Nuts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Connect the connector.
4. Install the front door service hole cover.
  HINT:
  
  Make sure that cover is securely installed.
INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY
HINT:

Use the same procedure as for the RH side (see REASSEMBLY ).
INSTALL FRONT DOOR INSIDE HANDLE BEZEL
HINT:

Use the same procedure as for the RH side (see REASSEMBLY ).

Fig 2: Identifying Front Door Inside Handle Bezel
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH
HINT:

Use the same procedure as for the RH side (see REASSEMBLY ).
INSTALL FRONT DOOR ARMREST BASE UPPER PANEL
HINT:

Use the same procedure as for the RH side (see REASSEMBLY ).